OSH800C Disposable EEG Sensors（Compatible with BIS™ monitors）
这里是标题一h1占位文字
Classification :
Disposable EEG sensors not only provide you with recognized EEG Monitoring and assessment of state of consciousness, while adding more powerful functions to meet clinical needs, it is based on an EEG signal interpretation.
Technical introduction
Material: The EEG sensor does not contain latex and adopts imported conductive adhesive, which
has good biocompatibility, no toxicity, no skin irritation, no sensitization and low resistance.
The scope of products
It is mainly used in monitoring equipment to monitor patients' EEG signals, and used in conjunction with monitoring instruments to non-invasively measure patients' EEG and EEG signals.
Features
The non-invasive measurement is sensitive, the paste is strong, and the volume is small.
Instructions for use
Cleanse the skin with water or a medical scrub to remove sweat and oil stains from the skin.
Tear the packaging bag along the V-shaped opening and take out the sensor.
Remove the electrode and place the sensor in the position shown in the figure (be careful not to
press the circular area in the center of the sensor when pasting the sensor, so as to avoid the
conductive glue overflowing not affect the sticking and use of electrodes).
Electrode 1: Located 5cm above the bridge of the nose in the center of the forehead;
Electrode 2: Placed flat between electrodes 1 and 4;
Electrode 3: Located in the temple position;
Electrode 4: Above the eyebrows
Insert the sensor plug into the corresponding interface of the lead wire.
GET A FREE QUOTE
RELATED PRODUCTS
CONTACT US
Add : Room 1916, Building 1, Xinghuo E Square, No.20 Xinghuo Road, Jiangbei New District, Nanjing210031, China
GET A FREE QUOTE