Home page

DM6B Veterinary Anesthesia Machine

这里是标题一h1占位文字

Gas supply Gas source O2（For medical use） Input pressure range 280 kPa～600 kPa Output pressure of regulator

Classification :

Veterinary Equipment

WhatsApp : 0086-17183463881

E-mail : admin@longcaremed.com

Gas supply

Gas source: O2(For medical use)

Input pressure range: 280 kPa～600 kPa

Output pressure of regulator

(gas cylinder supply) less than 440 kPa

Safety valve: 780kPa

Negative pressure air source: ≥75 L/min

Flow rate

Adjust range of flow meter

O₂ 0 L/min～5 L/min

precision (20℃ 101.3kPa，supply pressure 440 kPa)

The precision from 10 % of full scale to full scale is ±10 % of indicated value

The precision lower than 10 % of full scale is class 4.

Flow rate of oxygen flush valve: 25 L/min～ 75 L/min

Output pressure for fresh valve: 30 kPa ～ 45 kPa

Power supply

Voltage: 100-240 V ～

Frequency: 50/60 HZ

Input power: 40VA

Fuse

Main power: T2AH 250V

Internal power: T4AH 250V

Ventilation mode

IPPV

A/C

SIMV

Ventilation parameters

Specification

Frequency

Adjusting range: 1 bpm ～ 100 bpm

(Under SIMV：1 bpm～ 20 bpm All mode except SIMV: 4 bpm～100 bpm)

Allowable error: ± 15 %

Inhalation time (I:E) (Tinsp)

Adjusting range 2:1（1:0.5）～ 1:6 (0.2s ～ 6.0s)

Allowable error ± 15 % or ± 0.1s, whichever is the greater

Tidal volume (VT)

Adjusting range 0,20 mL ～ 1500 mL

Minute ventilation (MV)

Max MV ≥18 L/min

PEEP(optional)

Adjusting range 0 kPa ～ 3kPa

Allowable error ± 15 % or ±(0.3 kPa＋10%setting value), whichever is the greater

Pressure trigger(PTr)

Adjusting range － 2.0 kPa ～ 0kPa(Under PEEP)

Allowable error ±(0.1 kPa＋10 %setting value)

Flow trigger(FTr)

Adjusting range OFF, 0.5 L/min ～ 30 L/min

Allowable error ＞3L/min：±20% ≤3L/min：±0.6 L/min

Holding time(Inhalation platform)(TIP)

Adjusting range 0 ～ 3s(Less than 50% of inhalation time)

Allowable error ± 15 % or± 0.1 s,whichever is the greater

Sigh

Adjusting range 0.1/100 ～ 5/100

Apnea ventilation

Adjusting range OFF, 5 s　～ 60 s

Max set working pressure

pressure limit range 0.3kPa ～ 10kPa

Allowable error ± 15 % or ±(0.2kPa＋10%setting value), whichever is the greater

Max pressure ≤12.5 kPa

explanation:

1 set pressure limit value to produce maximum working pressure( the upper limit of high airway pressure alarm).

2 do not use negative pressure at exhalation.

3 maximum limit pressure is pressure of the safety valve.

Driven gas

Gas source O2(For medical use)

Input pressure range 280 kPa～600 kPa

Fresh gas compensation

Compensation range 0～15 L/min
gas composition O2 and anaesthetic

Ventilation parameter Monitoring

The fllowing are monitoring parameters under the environment of body temperature and pressure-saturated.

Minimum exhalation volume maybe monitored is 50 mL/min.

display：

Parameter	Range	Resolving power	Accuracy
Frequency（Freq）	0 bpm ～ 100 bpm	1 bpm	±15 %
Tidal volume（VT）	0～ 2000 mL	10 mL	＞100 mL , ±20% ≤100 mL, ±0.02 L
Minute ventilation（MV）	0～100L/min	0.1 L/min	＞1L/min, ±20% ≤1L/min, ±0.5 L/min
（Ppeak）	0～100 cmH2O	1 cmH2O	±（4%full scale+4%actual reading）
O2 concentration(optional)	15 % ～ 100 %	0.1 %	±[ 2.5 %（v/v）＋2.5 %（concentration level）]
Compliance	1～1000mL/ cmH2O	1mL/ cmH2O

Waveform display：

Time- airway pressure（under all modes）

Time—flow（under all modes）

pressure volume loop（all modes）

Remarks：The machine cannot record all the adjusting and monitoring values.

GET A FREE QUOTE